Damascus Steel

I have been blessed to become a well known and respected maker of Damascus in the world of cutlery. In the past many years I have begun to find other markets for my damascus, including watches and jewelry. The applications for the beauty and serendipity of damascus seem to be endless.

I pride myself on producing the highest quality damascus in the world. I believe my damascus to be the cleanest, most precise, and greatest performing available. I have a variety of steel combinations and patterns available for every application, to a high performance custom knife or a wedding band. I offer it in many sizes for most any product you may want to produce.

I was among the first to produce stainless damascus, and the first to sell it regularly and commercially. Stainless damascus of course has the benefit of being stain resistant. Making stainless damascus offers many difficulties over producing carbon steel damascus. Carbon steel damascus is much more commonly produced. When using the proper stainless steels compromises do not have to be made with corrosion resistance.

Now, after making over 10,000 bars of damascus, I have learned all of the ins and outs of the process. I have found the making of damascus steel to be an incurable disease, the addiction won't go away! I dream at night of new patterns and new steel combinations. The journey never gets boring. I promise to deliver that love and excitement in a bar made for you.

Damascus Patterns

Spirograph	Sharkstooth	Banded Ladder
Fireball	Raindrop	Firestorm
Reptilian	Basket Weave	Snake Skin
Bubble Wrap	Vines & Roses	Herringbone
Dot Matrix	Twist	Razor Wire

Heat Treating

All Stainless Damascus
Materials Used	AEB - L and 304
Patterns Available	Random, Ladder, Raindrop, Bubblewrap, Twist, Firestorm, Sharkstooth, Spirograph, Vines & Roses, Composite Bar, Fireball, Basketweave, Dot Matrix, Herringbone, and Reptilian
Heat Treating	Preheat furnace to 1925 f Place blade in furnace Allow furnace to cycle back to 1925 f Soak for 10 minutes Quench in oil or Plate quench                     Quench in Liquid Nitrogen directly after quench for 1 hour.  Temper at 350 f 2 times for 1 hour each time
Finishing	Take blade to 400 grit finish (must be a sharp belt) Do not buff before etching Hand rubbed finish is also good Etch in a 50/50 diluted solution of ferric chloride (available at Radio Shack) and distilled water Submerse blade in solution for 10 minutes Remove blade and rinse under running water Repeat every 5 minutes until desired results are obtained For a brighter blade, buff and re-etch 1 time Neutralize with tri sodium phosphate
Comments	This steel cuts very well. There are makers in Alaska that prefer this steel over all others! Properly heat treated this is a very good steel. This steel has a fairly good contrast between materials. It is easy to etch.

High Contrast Damascus
Materials Used	O1 or 19C5VA and Nickel
Patterns Available	Random, Ladder, Raindrop, Bubblewrap, Twist, Firestorm, Sharkstooth, Spirograph, Vines & Roses, Composite Bar, Fireball, Basketweave, Dot Matrix, Herringbone, and Reptilian
Heat Treating	Preheat furnace to 1500 f Place blade in furnace Allow furnace to cycle back to 1500 f Soak for no more than 5 minutes Quench in oil Temper at 400 f 2 times for 1 hour each time
Finishing	Same as stainless but take to 600 grit This material can be hot blued
Comments	This steel has stunning contrast when etched or blued. Available in larger sizes in twist pattern over stainless

Double High Carbon Damascus
Materials Used	O1 or 19C5VA & 15N20 (2% Nickel high carbon steel)
Patterns Available	Spirograph, Vines & Roses, Sharkstooth, Firestorm, Ladder, Raindrop, Twist, and Bubblewrap
Heat Treating	Preheat furnace to 1500 f Place blade in furnace Allow furnace to cycle back to 1500 f Soak for no more than 5 minutes Quench in oil Temper at 400 f 2 times for 1 hour each time
Finishing	Same as stainless except acid bath should be 5 parts water and 1 part ferric chloride.
Comments	This steel is made from high carbon steels This steel has excellent edge holding properties This steel has very good contrast between materials This is our most expensive and collectible steel

Devin Thomas heat treating a chefs knife.